Loading Spouts

Applications

Bore rero int haristi conet qui

andae maximpe lenihic tescilit

occae Vellect otaspedi aut

dolupta porepud itamus

quae et enditis ape quam earum

Features

Bore rero int haristi conet qui

andae maximpe lenihic tescilit

occae Vellect otaspedi aut

Advantages

Bore rero int haristi conet qui

andae maximpe lenihic tescilit

occae Vellect otaspedi aut

dolupta porepud itamus

Bore rero int haristi conet qui andae maximpe lenihic tescilit, occae. Vellect otaspedi aut dolupta porepud itamus, quae et enditis ape quam earum fuga. Mus quam lam re repedit vendebit, sitatiam quam eos rerum destem iducil et ut latem soles et estem ius dent ati sedit endi comnimporest ipsa nossimu sandunt aut quoditem fugita simpelles sinverferum volupid quas ma nonse vellorest quat voluptae cus, utem. Vidigendit ideliatem reped ullor as voloratenis autae int fugiamus.

TANKER LOADING SPOUTS

These telescopic loading spouts are designed to load dry, dusty products into silo tankers and closed railcars or containers.

TANKER LOADING BELLOWS BENEFITS

  • sealing cone for perfect tanker sealing
  • closure cone to prevent any spillage of dust as the loading spout is being raised
  • level switch indicating when the tanker is full
  • electric winch with limit switches and emergency sensors
  • three cable lifting system
  • unit comes fully or partly pre-assembled

MAIN TECHNICAL FEATURES

  • max. flow rate: up to 200-250 m3/h (based on the model)
  • level switch: rotary / vibrating / capacitance
  • operating conditions: -40/+80°C (other per request)
  • loading conduit: cones/single bellows, cones/double bellows
  • dedusting: spouts with built-in dust collectors / external filtration / connection to existing dedusting technology

ACCESSORIES

  • electric control box (plastic or stainless steel)
  • pendant or remote control
  • vibration unit to shake off the rest of the product from the equipment
  • shut-off valves (manual, pneumatically and electrically driven)
  • ATEX design

NZU300E

telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers

OPERATION QUALITIES
  • max. flow rate 250 m³
  • grain size 0-40 mm
  • inlet diameter DN300
  • pipe Ø 125 mm for connection to remote dust filtration
  • operating temperature -20 °C / +80 °C
  • motor drive 0.55 kW
  • loading conduit consisting of internal cones and outer bellows
Design
  • electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
  • terminal box for cable connection
  • level switch - rotary / vibrating / capacitance type
  • bottom closing cone to prevent any spillage of dust as the loading spout is being raised
Additional Accessories
  • electric control box
  • pendant or remote control
  • vibration unit
  • shut off valves (manual, electro, pneumatic)
  • design for ATEX / non-standard temperature (-40 °C / +250 °C)

NZU300S

telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers

OPERATION QUALITIES
  • max. flow rate 300 m³
  • grain size 0-40 mm
  • inlet diameter DN300
  • pipe Ø 250 mm for connection to remote dust filtration
  • operating temperature -20 °C / +80 °C
  • motor drive 0.9 kW
  • loading conduit consisting of internal cones and outer bellows
Design
  • electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
  • terminal box for cable connection
  • level switch - rotary / vibrating
  • rubber-coated sealing cone for perfect tanker sealing
  • bottom closing cone to prevent any spillage of dust as the loading spout is being raised
  • available with the external dust collector and double bellows
Additional Accessories
  • electric control box
  • pendant or remote control
  • vibration unit
  • shut off valves (manual, electro, pneumatic)
  • design for ATEX / non-standard temperature (-40 °C / +250 °C)

NZUF300E

telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers

OPERATION QUALITIES
  • max. flow rate 250 m³
  • grain size 0-40 mm
  • inlet diameter DN300
  • operating temperature -20 °C / +80 °C
  • motor drive 0.55 kW
  • built-in filter: flow rate 900 m³/h, filter area 17.5 m², residual concentration at the output < 10 mg/m³
  • internal thread G ½"
  • loading conduit consisting of internal cones and outer bellows
Design
  • electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
  • terminal box for cable connection
  • level switch - rotary / vibrating / capacitance type
  • bottom closing cone to prevent any spillage of dust as the loading spout is being raised
Additional Accessories
  • electric control box
  • pendant or remote control
  • vibration unit
  • shut off valves (manual, electro, pneumatic)
  • design for ATEX / non-standard temperature (-40 °C / +250 °C)

TRUCK/RAILCAR LOADING SPOUTS

These telescopic loading spouts are designed for the efficient dust-free loading of dry, dusty bulk solids into trucks and railcars.

TRUCK/RAILCAR LOADING BELLOWS BENEFITS

  • dust-free loading secured by the outer dedusting bellows
  • bottom part with dustproof skirt with inner level switch automatically stepping the skirt
  • electric winch with limit switches and emergency sensors
  • three cable lifting system
  • unit comes fully or partly pre-assembled

MAIN TECHNICAL FEATURES

  • max. flow rate: 800 m3/h (based on the model)
  • level switch: rotary / vibrating 
  • operating conditions: -40/+80 °C (other per request)
  • loading conduit: cones / single bellows, telescopic tubes / single bellows

ACCESSORIES

  • electric control box (plastic or stainless steel)
  • pendant or remote control
  • vibration unit to shake off the rest of the product from the equipment
  • shut-off valves (manual, pneumatically and electrically driven)
  • ATEX design

NZOF300E

telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers

OPERATION QUALITIES
  • max. flow rate 250 m³
  • grain size 0-80 mm
  • inlet diameter DN300
  • operating temperature -20 °C / +80 °C
  • motor drive 0.55 kW
  • built-in filter: flow rate 900 m³/h, filter area 17.5 m², residual concentration at the output < 10 mg/m³
  • internal thread G ½"
  • loading conduit consisting of internal cones and outer bellows
Design
  • electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
  • terminal box for cable connection
  • level switch - rotary / vibrating
  • dustproof bell rubber skirt at the lower end of the loading spout
  • available also with manual winch
Additional Accessories
  • electric control box
  • pendant or remote control
  • vibration unit
  • shut off valves (manual, electro, pneumatic)
  • design for ATEX / non-standard temperature (-40 °C / +250 °C)

NZO300E

telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers

OPERATION QUALITIES
  • max. flow rate 250 m³
  • grain size 0-80 mm
  • inlet diameter DN300
  • pipe Ø 125 mm for connection to remote dust filtration
  • operating temperature -20 °C / +80 °C
  • motor drive 0.55 kW
  • loading conduit consisting of internal cones and outer bellows
Design
  • electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
  • terminal box for cable connection
  • level switch - rotary / vibrating
  • dustproof bell with rubber skirt at the lower end of the loading spout
  • available also with manual winch
Additional Accessories
  • electric control box
  • pendant or remote control
  • vibration unit
  • shut off valves (manual, electro, pneumatic)
  • design for ATEX / non-standard temperature (-40 °C / +250 °C)

NZO400S

telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers

OPERATION QUALITIES
  • max. flow rate 400 m³
  • grain size 0-100 mm
  • inlet diameter DN400
  • operating temperature -20 °C / +80 °C
  • motor drive 0.9 kW
  • loading conduit consisting of internal cones and outer bellows
Design
  • electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
  • terminal box for cable connection
  • level switch - rotary / vibrating
  • dustproof bell with rubber skirt at the lower end of the loading spout
Additional Accessories
  • electric control box
  • pendant or remote control
  • vibration unit
  • shut off valves (manual, electro, pneumatic)
  • design for ATEX / non-standard temperature (-40 °C / +250 °C)

NZO600H

telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers

OPERATION QUALITIES
  • max. flow rate 500 m³
  • grain size 0-100 mm
  • inlet diameter DN600
  • operating temperature -20 °C / +80 °C
  • motor drive 2.2 kW
  • loading conduit consisting of internal cones and outer bellows
Design
  • electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
  • terminal box for cable connection
  • level switch - 2x rotary
  • dustproof bell rubber skirt at the lower end of the loading spout
Additional Accessories
  • electric control box
  • shut off valves (manual, electro, pneumatic)
  • design for ATEX / non-standard temperature (-40 °C / +250 °C)

STOCKPILE LOADING SPOUTS

These telescopic loading spouts are designed for the efficient dust-free loading of dry, dusty bulk solids on stockpiles.

STOCKPILE LOADING BELLOWS BENEFITS

  • robust design and construction – you will not destroy this device!
  • bottom part with dustproof skirt with inner level switch automatically stepping the skirt
  • electric winch with limit switches and emergency sensors
  • three cable lifting system
  • particle size up to 500 mm

MAIN TECHNICAL FEATURES

  • max. flow rate: 2000-3000 m3/h (based on the model)
  • level switch: rotary / tilt 
  • operating conditions: -40/+80°C (other per request)
  • loading conduit: tubes/single bellows, tubes

ACCESSORIES

  • electric control box (plastic or stainless steel)
  • external dust collector
  • maintenance platform
  • inlet hoppers
  • ATEX design

NZO300S

telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers

OPERATION QUALITIES
  • Inlet diameter DN300
  • max. flow rate 250 m³
  • grain size 0-50 mm
  • pipe for connection to remote dust filtration
  • operating temperature - 20 °C / + 80 °C
  • motordrive 1,6 kW
  • loading conduit consisting of internal cones and outer bellows
Design
  • electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
  • terminal box for cable connection
  • level switch - 2x rotary
  • dustproof bell rubber skirt at the lower end of the loading spout
Additional Accessories
  • electric control box
  • shut off valves (manual, electro, pneumatic)
  • design for ATEX / non-standard temperature (-40 °C / +250 °C)

NZO600DH

telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers

OPERATION QUALITIES
  • Inlet diameter DN600
  • max. flow rate 1000 m³/h
  • grain size 0-100 mm
  • pipe for connection to remote dust filtration
  • operating temperature - 20 °C / + 80 °C
  • motordrive 3 or 4 kW
  • loading conduit consisting of internal cones and outer bellows
Design
  • electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
  • terminal box for cable connection
  • level switch - 2x rotary
  • dustproof bell rubber skirt at the lower end of the loading spout
Additional Accessories
  • electric control box
  • design for ATEX / non-standard temperature (-40 °C / +250 °C)
  • external dust collector

NZO900DH

telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers

OPERATION QUALITIES
  • max. flow rate 2000 m³/h
  • grain size 0-400 mm
  • inlet diameter DN900
  • operating temperature - 20 °C / + 80 °C
  • motordrive 5.5 / 7.5 / 9.2 / 11.0 kW
  • loading conduit consisting of internal cones and outer bellows
Design
  • electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
  • terminal box for cable connection
  • level switch - 4x tilt type
  • dustproof bell rubber skirt at the lower end of the loading spout
Additional Accessories
  • electric control box
  • design for ATEX / non-standard temperature (-40 °C / +250 °C)

SHIP LOADING SPOUTS

The Shiploader telescopic loading spout allows high-capacity ship loading.

MAIN TECHNICAL FEATURES

  • max. flow rate: 4000 m3/h (based on the model)
  • level switch: rotary / tilt
  • operating conditions: -20/+80°C (other per request)
  • loading conduit: tubes/single bellows, tubes

ACCESSORIES

  • electric control box (plastic or stainless steel)
  • pivot gimbals (movable in one or two axis)
  • protection cages
  • load cells to control the spout would not be overloaded
  • ATEX design

Limestone

telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers

MAIN TECHNICAL FEATURES
  • max. flow rate: 4000 m3/h (based on the model)
  • level switch: rotary / tilt
  • operating conditions: -20/+80°C (other per request)
  • loading conduit: tubes/single bellows, tubes
Additional Accessories
  • electric control box
  • pivot gimbals (movable in one or two axis)
  • protection cages
  • load cells to control the spout would not be overloaded
  • ATEX design

We offer two types of shiploaders:
1. with distribution trimmer shovel
angle of rotation up to 350°
available also with tilting mechanism
2. with dustproof bell and rubber skirt

COMBINED LOADING SPOUTS

NZK telescopic loading spouts are designed for the efficient dust-free loading of dry, dusty bulk solids into both tankers and open vehicles or railcars.

COMBINED LOADING BELLOWS BENEFITS

  • 2 loading spout combined in 1
  • dust-free loading secured by the dustproof skirt with inner level switch automatically stepping the skirt
  • bottom cone for the perfect sealing on the tanker opening
  • three cable lifting system
  • unit comes fully or partly pre-assembled

MAIN TECHNICAL FEATURES

  • max. flow rate: 100-200 m3/h (based on the model)
  • level switch: rotary / vibrating / capacitance
  • operating conditions: -40/+80°C (other per request)
  • loading conduit: cones/single bellows, cones/double bellows

ACCESSORIES

  • electric control box (plastic or stainless steel)
  • pendant or remote control
  • vibration unit to shake off the rest of the product from the equipment
  • shut-off valves (manual, pneumatically and electrically driven)
  • ATEX design

NZK300ER

telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers

OPERATION QUALITIES
  • max. flow rate 250 m³
  • grain size 0-40 mm
  • inlet diameter DN300
  • pipe Ø 125 mm for connection to remote dust filtration
  • operating temperature -20 °C / +80 °C
  • motor drive 0.55 kW
  • loading conduit consisting of internal cones and outer bellows
Design
  • electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
  • terminal box for cable connection
  • level switch - vibrating / capacitance type
  • bottom part consisting of sealing cone and dustproof bell with rubber skirt
  • available also with electrical lifting of the dustproof bell
Additional Accessories
  • electric control box
  • pendant or remote control
  • vibration unit
  • shut off valves (manual, electro, pneumatic)
  • design for ATEX / non-standard temperature (-40 °C / +250 °C)

NZKF300ER

telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers

OPERATION QUALITIES
  • max. flow rate 250 m³
  • grain size 0-40 mm
  • inlet diameter DN300
  • operating temperature -20 °C / +80 °C
  • motor drive 0.55 kW
  • built-in filter: flow rate 900 m³/h, filter area 17.5 m², residual concentration at the output < 10 mg/m³
  • loading conduit consisting of internal cones and outer bellows
Design
  • electric winch limit switches for highest and lowest position, emergency sensors for highest and lowest positions
  • terminal box for cable connection
  • level switch - vibrating / capacitance type
  • bottom part consisting of sealing cone and dustproof bell with rubber skirt
  • available also with electrical lifting of the dustproof bell
Additional Accessories
  • electric control box
  • pendant or remote control
  • vibration unit
  • shut off valves (manual, electro, pneumatic)
  • design for ATEX / non-standard temperature (-40 °C / +250 °C)

Our locations

Siethom has own locations in Austria, Hungary, Abu Dhabi and Jakarta. We develop real solutions and we always try to optimize your production line. Our well experienced employees will work out for you the best and economic solution.