Foot mounted electric vibrators
|Electric Vibrator MVSI|| |
The MVSI series represents the line of reference products for manufacturer’s of vibrating machines and plants operating in many industrial sectors and is made up of the largest range on the market, with centrifugal force values up to 30500 Kgf (300kN).
|Electric vibrators with split covers MVSI-TS|| |
The MVSI-TS series is indispensable in those applications where the position of the vibrator in the vibrating machine makes it difficult to axially remove the weight cover, while it has space to carry this out in a radial direction. The MVSI-TS series complies with the most recent IEC and EN international standards for use in atmospheres with potentially explosive powders. In particular, the MVSI-TS series can be used in areas 21 and 22.
|Increased safety electric vibrators MVSI-E|| |
The MVSI-E series has been designed for use in industrial processes in environments with a potentially explosive atmosphere, due to the presence of explosive gas and dust, in compliance with ATEX Directive (94/9/CE). In particular, the MVSI-E series can be used in areas 1 and 2 (gas) and in areas 21 and 22 (dusts).
|Electric vibrators in stainless steel AISI 316L MVSS|| |
The MVSS stainless steel series vibrators are characterized by their total protection from liquids, dusts, aggressive agents and contaminants, thanks to the stainless steel casing and external components.
|Explosion-proof electric vibrators CDX|| |
The CDX explosion-proof vibrators have been designed for use in industrial processes in a potentially explosive atmosphere. The enclosure of the CDX vibrators is equipped with increased thickness and joints to prevent the transmission of an internal explosion to the surrounding area. The CDX series is characterized and enhanced by many different certifications, depending on the vibrator model.
|Electric vibrators with reduced overall size MICRO|| |
The MICRO series has been designed for continual industrial service in processes where a reduced centrifugal force and reduced overall vibrator size are required. MICRO vibrators are used in numerous applications in feeding, transport, screening, sizing, separation processes, compaction in the automatic machines used in the chemical industry, food industry, pharmaceuticals, packaging and automation in general.
The M3 vibrator represents a particular version deriving from the internal components of the MVSI series, in which the casing has the terminal box on the same side as the fixing base. The M3 was conceived to minimize overall height, for positioning on vibrating machines with little space and, using its multi-hole fixing, to adapt to different drilling spaces. The M3 series complies with the most recent IEC and EN international standards for use in atmospheres with potentially explosive powders. In particular, the M3/65 series can be used in areas 21 and 22.
|Direct current electric vibrators MVCC|| |
The MVCC series of vibrators with direct current has been designed for use in those situations where network electricity is not present. In particular for hoppers, silos and gate-controls and roll-on roll-off vehicles (concrete mixers, pumps for concrete, plasterers, salt distributors, gravel spreader, fertiliser spreader, hauled silos, industrial sweeper filters). The newly-conceived electric motor, with permanent magnet poles, and the increase in size of the electrical parts, allow constant, high yielding performance.