Transfer Point Solution

Siethom offers bulk materials transfer point products to support and align conveyor belts. Our product range includes conveyor belt alignment, conveyor belt support and conveyor belt sealing.

MENÜ

Belt Support

Picture

Productname

Description

Document

EVO® Impact Idler

Slides in and out of position under the belt without the need to raise the belt or move adjacent idlers. Clamp mounting system allows precision installation. Can be used where idlers must be closely spaced or adjacent to impact or support cradles. Requires only 8 inches of spacing, with one inch on each side of idler frame.

EVO® Impact Cradle

Like the rest of the EVO® Modern Conveyor Architecture, the Impact Cradle features track-mounted sub-assemblies. The individual impact bars slide into position on the section supports, and the sections slide into position under the belt, making for quick and easy installation, inspection and maintenance.

EVO® Slider Cradle

The EVO® Slider Cradle eliminates pinch points where trapped material can gouge or tear the belt and stabilizes the belt's path to improve sealing and tracking. Low-friction UMHW bars support belt edges to stabilize the belt line, eliminating belt sag and bounce. Proprietary "box" design allows each bar too be turned over to provide a second wear life.

Impact Cradle HD

Martin® Impact Cradles HD are engineered to withstand impact forces from 12,000 to 17,000 pounds of force (53.4 to 75.6 kN). This complies with the Heavy-Duty (H) Classification as specified in CEMA Standard 575-2000.

Impact Cradle LD

Installed under the belt conveyor loading zone, Martin® Impact Cradles absorb the force of falling material to prevent damage to the belt and structure and to help eliminate spillage.

Slider Cradle

Installed under the skirtboard of a transfer point, Martin® Slider Cradles support the edges of the belt to eliminate sag. These cradles prevent transfer point spillage by stabilizing the belt’s path and allow the effective sealing of the belt edge. Cradles are available with high-performance UHMW or Stainless Steel Bars to match application requirements.

Idler Conversion Kit

The Martin® Idler Conversion Kit is a simple retrofit that links two or more troughing idler frames, replacing the wing rollers with Martin® Slider Bars. It utilizes existing idler frames and center rollers and conforms with idlers from a wide range of manufacturers.

EVO® Return Roller

The EVO® Return Roller is a pivoting track-mounted return idler that allows for safe, quick and simple one-sided serviceability and roll replacement. The track-mounted design reduces the risk of injury and allows quick replacement of the roll.

Impact Cradle MD

Installed under the belt conveyor loading zone, Martin® Impact Cradles absorb the force of falling material to prevent damage to the belt and structure and to help eliminate spillage.

EVO® Combination Cradle

EVO® Combination Cradle provides a powerful, adjustable load support while helping to stop dust and spillage in the conveyor load zone. It also removes gaps between the conveyor belt idlers to provide an effective sealing surface for skirting.